July 26 - August 5, 2002
Wiring and Plumbing
Here's the finished wiring on term strips just forward
of the instrument panel. The left block is the positive feeds
from the switches and fuses. The center block is the ground bus,
and the right block is all the wiring for the MicroAir radio.
Another view of the finished wiring. I didn't take
any pictures of the mess I had before I tied everything down.
Here's the wiring at the rear of the plane.
No smoke and no sparks. It actually works!
Here's the fuel system. Both wing tanks feed into the
header tank on the firewall, which has a sight tube across the
front. The flow then goes through a filter, the flow sensor for
the EIS, the fuel pump, and to the carbs.
Not shown is the completed brake plumbing.
